rafavi
Better your life!
Sidebar
Blue Star
Bluetooth® Low Energy Wireless Solution to Accelerate Realization of IoT of Embedded Devices.
Single chip Bluetooth® 5.0 Low Energy application controller using popular ARM Cortex M4 core with dedicated Secure Crypto Engine
The EK-RA4W1 evaluation kit enables users to effortlessly evaluate the features of the RA4W1 MCU Group and develop embedded systems applications using Renesas' Flexible Software Package (FSP)and various IDEs.
Renesas Extends Bluetooth 5.0 Connectivity to RA Family of 32-Bit MCUs with Arm Cortex-M Core
星期一, 21 09月 2020
Enhanced Security and Privacy for Bluetooth 5.0 Low Energy Connections Supported with Flexible Software Package and Comprehensive Arm Ecosystem.
Renesas Electronics Corporation introduced the first RA microcontroller (MCU) with an integrated Bluetooth® 5.0 Low Energy radio on 07 May 2020. The single-chip RA4W1 MCU includes a 48 MHz, 32-bit Arm® Cortex®-M4 core and Bluetooth 5.0 core delivered in a 56-pin QFN package. Together, the RA4W1 MCU and easy-to-use Flexible Software Package (FSP) enables engineers to immediately begin development with Arm ecosystem software and hardware building blocks that work out-of-the-box with RA MCUs.
The RA4W1 MCU makes it easy for embedded designers to develop safe and secure IoT endpoint devices for Industry 4.0, building automation, metering, healthcare, consumer wearable, and home appliance applications. The MCU is also ideal for developing IoT edge devices for wireless sensor networks, IoT hubs, an add-on to gateways, and an aggregator to IoT cloud applications.
This LaunchPad™ speeds development with a Bluetooth® Low Energy (BLE) connection using the CC2640R2F or CC2640R2L devices. The compatible SDK offers a fully qualified Bluetooth 5 protocol stack for single-mode BLE applications supporting high speed mode and example Bluetooth 5 coded physical layers (PHY) for long range mode testing. A Bluetooth 4.2 stack is also available.
Price：?29.00
The SimpleLink CC2640R2 Software Development Kit (SDK) delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink Bluetooth Low Energy CC2640R2F wireless MCU. This powerful software toolkit provides a cohesive and consistent software experience for all SimpleLink CC2640R2F users by packaging essential software components such as the Bluetooth low energy (BLE) protocol stack, TI-RTOS kernel and TI Drivers in one easy-to-use software package along with exhaustive documentation.
Low-power wireless standard to easily connect any product to smartphones or tablets
Double the speed,Four times the range,Eight times the broadcasting capacity
High speed mode
- 2x data throughput
- Faster over-the-air downloads
- Reduce battery consumption
Long range mode
- 4x the range with coded PHY rates of 125 kbps
- Same TX and RX current consumption
- Whole-house coverage
Advertising extension
- Reduce load on advertising channels
- Initiate long-range connections
STMicroelectronics Bluetooth low energy expansion board based on the BlueNRG-M0 module for STM32 Nucleo X-NUCLEO-IDB05A2
星期五, 18 09月 2020
The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module.
The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time.
The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators.
The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout.
The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board.
Make your applications more secure and connected with the STM32
Nordic nRF52805 adds Bluetooth 5.2 SoC in WLCSP optimized for compact, two-layer PCB wireless products to proven nRF52 Series
星期四, 17 09月 2020The nRF52805 SoC offers Bluetooth LE high-throughput 2 Mbps and enhanced Channel Selection Algorithm #2, and 2.4 GHz proprietary protocols for cost-constrained applications such as disposable medical products, styluses, sensors, and beacons.