Sidebar
Blue Star
With Microchip Bluetooth Low Energy modules, there’s no need to be an RF expert or navigate the costly and time-consuming certification process. These modules come with global certification, preprogrammed firmware and a simple ASCII interface for ease of use. Each module’s data sheet also provides board placement and layout guides to further simplify your development.
- Fully certified for use in USA, Canada, Europe, Japan, China, Korea and Taiwan to save time and money
- ASCII interface enables simple communication with host MCU
- Preprogrammed with user-friendly firmware
- Drop-in wireless cable replacement
- High level of integration significantly reduces external Bill of Material and costs
A NEW KIND OF CONNECTED EDGE PLATFORM - Simplify Intelligence with Wi-Fi and Bluetooth
星期日, 13 09月 2020
NXP wireless solutions build upon decades of Wi-Fi and Bluetooth silicon, system and software design expertise. NXP is committed to drive large-scale deployment across multiple markets by a broad array of power- and cost-optimized Wi-Fi and Bluetooth chipsets, enabling products with today’s most advanced Wi-Fi capabilities.
The FRDM-KW41Z is a development kit enabled by the Kinetis® W series KW41Z/31Z/21Z (KW41Z) family built on Arm® Cortex®-M0+ processor with integrated 2.4 GHz transceiver supporting Bluetooth® Smart/Bluetooth®Low Energy (BLE) v4.2, Generic FSK, IEEE® 802.15.4 and Thread.
The FRDM-KW41Z kit contains two Freedom boards that can be used as a development board or a shield to connect to a host processor. The FRDM-KW41Z is form-factor compatible with the Arduino® Rev3 pin layout for more expansion options.
The FRDM-KW41Z highly-sensitive, optimized 2.4 GHz radio features a PCB F-antenna which can be bypassed to test via SMA connection, multiple power supply options, push/capacitive touch buttons, switches, LEDs and integrated sensors.
The FRDM-KW41Z platform is now supported by Arm® Mbed™ OS and Zephyr™ OS, both open source embedded operating systems for developing the Internet of Things.
Freedom Development Boards for Kinetis KW21Z, KW31Z and KW41Z MCUs. 2 boards
Technical and Functional Specifications
|
|
Can be configured as Host or Shield for connection to Host Processor |
|
Connectivity
|
SMA RF Connector |
| Sensors | Onboard NXP FXOS8700CQ digital sensor, 3D Accelerometer (±2g/±4g/±8g) + 3D Magnetometer |
| Debug | OpenSDA and JTAG debug |
| Support |
|
|